NLR AMS-1000 Boost Controller
NLR is the leader in forced induction technology. This unit will out perform ANY controller on the market, this unit can also be purchased to upgrade a current MSBC-1 set up. Take advantage of the latest technology from NLR!
The AMS-1000 multi-channel Air Management System represents the latest in Digital Technology. A Motorola 50-Mhz 16-bit processor is used to provide accurate and extremely fast control. A 128x64 pixel Graphical LCD Display is used to provide a Live display of Data and Inputs. GUI (Graphical User Interface) style operat-ing system makes setup and programming more intuitive and user friendly.
1—Billet aluminum enclosure and
all parts are specified over an
extended temperature range.
2—Vibration and weather proof.
3—System software can be erased and reprogrammed by the factory for future software updates.
4—User settings will remain for up to 20 years with no power applied. No back up batteries are needed.
5—Factory default RESET available in the options menu to restore controller to state it was out of the box from the factory.
6—Launch mode programmable to range of selected MAP sensor.
7—Scramble boost to apply an amount of pressure that you program to the gate, thus increasing boost no matter where in the main program you are currently at. Think of it as an emergency boost button, (kinda like a shot of nitrous) Remove the signal and it goes back to current target psi. Can be used as a single stage of boost
8—Reduce boost which works the opposite of scramble. It will remove a programmed amount from the current target psi. If you spin stab a button and it will reduce power instantly.
9—Delay timer for Activation in Shift Based Mode and First stage of Time based mode may be used as a delay timer.
10— Multiple operating modes:
Time Based (up to 6 stages) programmable to 1 hundredth of a second.
Shift Based (up to 6 stages)
GPS (up to 6 gears), self learning, can be used on anything with a voltage output to indicate gear position.
11—Programmable Ramp Rate to control the rate at which the pressure is applied. 0 to 100 psi range.
12—Dual output channels available or the auxiliary channel may be used for live boost pressure data viewing and data logging. Basically there are 2 controllers in 1 box. You can control multiple waste gate , valves, blow offs on supercharged systems thus giving you boost control.
13—Integrated Dual channel data logger with 35 seconds of record for each channel. Graph view of logged data. Logged data will remain until it is erased by user.
14—Graph view of programmed settings.
15—Display backlight and contrast is user adjustable from the options menu.
16—Help screens and setup wizards to help with setup.
17—Most inputs can be configured for + 12volt or ground activation.
18—All inputs have input protection diodes. All out puts have integrated noise suppression devices to clamp fly back voltage from solenoids.
19—Outputs short circuit protected and over current protected( 7 amp Maximum)
20—Reverse battery protection.
Data logging is integrated into the AMS-1000 and provides the user with instant feedback on the performance and real time operating parameters. The Data is pre-sented as a Graph with a Scroll function for detailed data information. If only the main boost channel is used for control of a waste gate the Aux channel MAP Sensor input can be used to log actual manifold pressure. If both channels are used for control then the logged data will represent the real time pressure applied to each channel during operation.
Availability: Usually ships within 10 business days.
|This product was added to our website on Friday 09 August, 2013.